4
、
Instruction Manual
27
The specific value depends on the site.
”Head mode”:This function is optional.When “
×
” is displayed,the function is off,when “
√” is displayed,the
function is no.When the function is turned on,when the automatic start-up is started,the cutting head of a
knife is automatically sawed first and then the automatic normal action is carried out.
4.2.4.3
Machine back to original button: the machine automatically moves each
functional component to the initial preparation position, namely the origin of the machine,
to prepare for automatic sawing.
The action flow of returning to the origin is as follows:
（
1
）
Stop the operation of the saw wheel and raise the saw frame to the upper limit
switch.
(2)
front clamp clamping and rear clamp clamping.
(3)
front clamp clamping and the rear clamp loosen.
(4)
feed to the origin switch.
4.2.4.4
Automatic start button: press this button to start the automatic cutting process,
and the machine will automatically complete multiple cycles from feeding positioning to
precise cutting according to the set parameters.
It should be noted that the following aspects of work should be done before "automatic
start" :
0
Automatic stop button: press this button to suspend the machine after the current
workpiece is sawed. If you want to cancel the pause, press "automatic start" again.
4.2.5 Fine tuning screen of sawing
