4
、
Instruction Manual
40
Press the"Send"button, start to sending until the blade head, prominent location in
front of 8~15mm.
11.
Press the" clamp" button, clamping the workpiece.
12
To rotate the Flux Adjust Knob to 0 position.
13. To move the Guide Arm to the inside of the Activities Clamp between 30~100mm,and
locking it.
14. To open the Belt Wheel Cover,and adjust running speed according to different
Material.(refer to 6.2 chapter)
15.
Rotate to AUTO mode..
16.
To press down the Band Saw Switch,and running
，
start the automatic cutting
；
17.
To slowly rotate the Flux Adjust Knob to suitable position,0.5 position is suitable when
the new Band Saw ia be used.
⚫
1.The new Band Saw must be sharpened.
⚫
2.To remove the workpiece and put down the Band Saw Frame to the lowest position.
⚫
3.Adjust the Flux Adjust Knob according to the material/size/sharp of workpiece and
speed of the Band Saw.
To judge whether the speed of dropping and running of the Band Saw appropriate according to
the shape of scrap iron?
