4
、
Instruction Manual
17
System status prompt bar: it indicates whether the current system is normal or abnormal.
Saw
blade linear speed: the machine tool is equipped with a saw wheel rotation induction device.
When the main machine is running, the system will detect the state of the high-speed signal
device.
For the operator to determine whether the speed of the saw blade meets the requirements
of the production cutting process.
Note: this function can only be used normally when the parameter "setting diameter of saw
wheel" is set in the "advanced parameters" interface.
Cutting speed:Display the current working speed value.
Current sawing force:Display the current sawing force.
Return position of material tongs:The machine is equipped a magnetic grid linear displacement
sensor,where the current position of the material table can be dynamically displayed in real time when the material
table moves back and forth.This function enables the operator to observe the dimension positioning of the material
rack at any time,and is conducive to the rapid troubleshooting of the feeding positioning fault of the machine.
This screen can complete the operation of machine all independent actions.
The work start is driven by motor, and other actions are all driven by hydraulic . Note that some actions has
their interlocks, limit protection and other functions, listed as follows:
1.
Only when the main clamp solenoid valve works, "work start" can be self-locking operation, otherwise for inching
operation.
2.“
work start", "main clamp clamping", "material clamp clamping", "rise" with self-locking function, other are inching.
