4
、
Instruction Manual
33
to locate the size, the compensation of one, two, three and four times feeding can be input
to increase the accuracy of the size.
Saw wheel retention function: select this function, the machine will automatically operate
the saw wheel after the first cut is completed, until the "number of processing" is zero or
automatic suspension
Automatic stop function of oil pump: This function is optional.When”
×
”is displayed,the function is
closed ,when”
√
”is displayed,the function is opened.When the operator leaves the a long time ,in order to save
power and unnecessary loss of hydraulic system,the system will automatically time,when the set time value is
reached,the hydraulic system will be closed to realize the total stop of the machine.
4.2.10 Model parameter interface
：
Type
parameters:This interface mainly sets the machine model parameters.
Maximum line speed setting of frequency conversion:Here input the highest line
speed of each gear frequency conversion.
