4
、
Instruction Manual
39
4.8 Replace saw blade
4.8.2 Put on saw blade
First to cleaning the accumulation of the scrap iron on the active wheel and passive wheel.
⚫
1.Put the saw band on the active wheel and passive wheel from behind of saw frame and
2.activities guide arm.
⚫
3.Set the saw band in the holder on guide arm.
⚫
4.Press the saw band in the groove of active wheel an passive wheel.
⚫
5.Put on the steel brush(refer to 4.2 chapter)
⚫
6.Close the cover of active wheel and passive wheel.
⚫
1.Must wear protection gloves before operation
4.9 Automatic mode operation
1.To choose Band Saw according to the material\size\shape of the workpiece.
2.To fix the Band Saw.(refer to 4.8 chapter)
3.To turn on the Power Switch.
4.Spin out "stop"button.
5.Set equipment operating data.(refer to 4.3 chapter)
6.Rotate to manual mode.
7.
To press and hold the Band Saw Up Button until the Band Saw come to higher
position,in order to put the workpiece.
8.To put the workpiece on the worktable.
9.
Press the" clamp" button, the clamping workpiece.
10.
