DVR User Manual
31
4.5.5 Alarm Out
Alarm out includes three sub menus: alarm out, schedule and buzzer
To setup alarm out:
Step 1: Enter into Menu
Setup
Alarm out tab. Refer to Fig 4-28. Input relay
name and hold time.
Step 2: Select the Schedule tab. This will bring up the schedule setup
interface.
The setup steps for schedule for alarm out are similar to normal
schedule setup; you can refer to 4.4.1 Schedule for details.
This step is very important for alarm out. Even if you have enabled alarm out in
the motion based alarm or sensor based alarm, you will not see t he result of Fig 4-28 Alarm Out
alarm out if no schedule is added here.
Buzzer
It is an inbuilt alarm output device. To setup Buzzer:
Step1: Enter into Menu
Setup
Alarm out
Buzzer tab;
Step2: Checkmark Buzzer and set buzzer alarm hold time. This would trigger the
buzzer when the system is in alarm.
4.6 Network Configuration
Network configuration includes five submenus: network, sub stream, Email,
server and other settings. Network settings must be configured if DVR is used for
monitoring over network.
4.6.1 Network
Step 1: Enter into Menu
Setup
Network
network tab. Refer to Fig4-29:
Step 2: HTTP port: the default value is 80. If the value changed, you need to
