Tomura PS-9316MI User Manual Download

Page: 28 / 106

DVR User Manual

Fig 4-12 Record Configuration-Record Bitrate

4.3.3 Time

Step1: Enter into Menu



Setup



Record



Time interface. Refer to

Fig 4-13:

Pre-alarm record time:

The record time prior to actual triggering of

an alarm i.e. record time before motion detection or a sensor alarm
was triggered.

Post-alarm record:

Set the post recording time after the alarm is

finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.

Expire time:

The time till which the records would be retained. If

the set date is overdue, the recorded files will be deleted
automatically.
Step2:

Select “All” to setup all channels with the same parameters.

Step3: C

lick “apply” to save the setting; click “exit” to exit current interface. Fig 4-13 Record Configuration-Time

4.3.4 Stamp

Parameter

Meaning

Rate

Range from: 1-30

（

NTSC

）

1-25(PAL)

Resolution

Support CIF , HD1, D1

Quality

The  higher  the  value  is,  the  clearer  the
recorded  image  is.  Six  options:    lowest,
lower, low, medium, higher and highest.

Encode

VBR and CBR

Max bit
stream

Range from: 256kbps~2Mpbs

Summary of Contents for PS-9316MI










































































































Search results

Summary of Contents for PS-9316MI

Reviews:

Related manuals for PS-9316MI

Brands by name

Popular brands

Tomura PS-9316MI, User Manual

Search results

Summary of Contents for PS-9316MI

Reviews:

Related manuals for PS-9316MI

Brands by name

Popular brands