Tomura PS-9316MI User Manual Download

Page: 27 / 106

DVR User Manual

4.3.1 Enable

Step1: Enter into Menu



Setup



Record



Enable tab. Refer to Fig 4-11:

Fig 4-11 Record Configuration-Enable

Step2: Checkmark record and audio.
Step3: Select All to setup the same settings for all channels.

4.3.2 Record Bitrate

Step1: Enter into Menu



Setup



Record



Record Bitrate tab. Refer to Fig 4-12:

Step2: Setup rate, resolution, quality, encode and max bit stream .
Step3:

Select “All” to set same settings for all channels .

Step4: C

lick “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to exit current

interface.

Note:

If the rate value set is over high the maximum resources of the device, the value will be adjusted automatically.

Parameter

Meaning

Record

To enable/disable recording
for the channel

Audio

enable/disable

audio

recording for the channel

Summary of Contents for PS-9316MI










































































































Search results

Summary of Contents for PS-9316MI

Reviews:

Related manuals for PS-9316MI

Brands by name

Popular brands

Tomura PS-9316MI, User Manual

Search results

Summary of Contents for PS-9316MI

Reviews:

Related manuals for PS-9316MI

Brands by name

Popular brands