8-11
8.10 Setting the time zone and SNTP server function
[Description]
Set the time acquisition function ON/OFF and the time zone (standard time).
[Operation]
On the system setting screen, select Comm. key
⇒
SNTP2 key to open the SNTP function setting
screen.
①
Selection of time acquisition function
When turning on the power supply, select ON/OFF of the function for acquiring the data from the
SNTP server.
(Enabled only when the SNTP function is turned ON. For details about the SNTP function,
refer section 8.9)
If the power supply is turned on when On is set, the recording process will not be started until the
time data is acquired.
②
Setting of time zone
Set the time zone (standard time).
By touching and selecting the key for (2) "Setting of time zone", the time zone selection screen
(See below) is opened.
Touch and select a time, and then touch the OK key to set it. (The selected item is indicated in
light blue.)
③
Setting of SNTP server
Select ON/OFF of the SNTP server function. (Supported in the main unit version 1.60 or later)
①
Selection of time
acquisition function
②
Setting of time zone
③
Setting of SNTP server