7-38
7.27 Setting the Int. SP DO
［
Explanation
］
The operator sets the output relay from “Int. SP DO (=This Paperless recorder output recording
state in Inside the virtual area)”.
［
Operation
］
Select the Others
⇒
Int. SP DO on the Parameter.
①
Int. SP DO
The operator determines
function of “Int. SP DO”.
Relay
No.
Exposition
Operating Conditions
Operates the relay
201
Always ON
The relay output will be “ON” during turned on
the power.
The relay output is on.
202
Always
OFF
The relay output will be “OFF” during turned
on the power.
The relay output is off.
203
Reserve(*)
204
Reserve(*)
205
SD 10% or less
・
SD mount
：
When the memory remaining
capacity indication is 10% or
less
・
SD unmount
：
When the memory remaining
capacity indication is 50% or
less
The relay output is on.
206
～
209
Reserve(*)
210
Operates recording
main record
During operates recording main record /
During stops recording main record
The relay output is on./
The relay output is off.
211
Operates recording
sub record
During operates recording sub record /
During stops recording sub record
The relay output is on./
The relay output is off.
212
Stops recording
main record
During stops recording main record /
During operates recording main record
The relay output is on./
The relay output is off.
213
Stops recording
sub record
During stops recording sub record /
During operates recording sub record
The relay output is on./
The relay output is off.
214
～
220
Reserve(*)
(*) System area. It can not be set arbitrarily.
①
Int. SP DO
②
Output relay
③
Exposition