7-42
7.29 Using the wizard function
［
Explanation
］
Necessary minimum set item can continuously be set by using the wizard function.
Moreover, when the Mode of the System is only “Normal”, this item is displayed. (Refer to Section
7.1 for Mode key.)
Note: When the recorder is in recording, the wizard function cannot be used.
［
Operation
］
Select the Others key
⇒
Wizard key on the Parameter.
①
CH No.
When “
①
CH No.” is selected, the “Input setting screen” is displayed.
Moreover, it is possible to switch to “Input setting screen”, “Scaling setting screen”, and “Scale
setting screen” by selecting Back and Next key touching.
(Refer to Section 7.5
～
7.8 for each setting screen.)
When OK key to the “Scale setting screen” is selected touching, the setting is end.
Moreover, the “copy screen of the channel” is displayed when the Copy key is selected.
(Refer to Section 7.12 for “Copy screen of the channel”.)
②
Group No.
When Next key is selected on the “CH No. selection screen” (above figure the left), the “group
No. selection screen” (above figure the right) is displayed.
When “
②
Group
No.” is selected, the “Group name setting screen” is displayed.
Moreover, it is possible to switch to “Group name setting screen”, “Group channel setting screen”,
and “Graph display setting screen” by selecting Back and Next key touching.
(Refer to Section 7.15
～
7.17 for each setting screen.)
When OK key to the “Graph display setting screen” is selected touching, the setting is end.
①
CH No.
②
Group No.