7-16
③
Output
The warning units relay number of the option is specified, and the warning output destination is
set. The selection item changes by connecting the relay and the transistor.
Common
:
The main body has been equipped normally.
Transistor
:
When the “DI/DO card (Option)” is selected, can be set.
④
Alarm value
This item cannot only be set when the “
②
Alarm type” is “Fault”.
The alarm value is set.
The decimal point position of the alarm value can be changed by changing the value of Scaling
key
⇒
Decimal point key. (Refer to Section 7.6 for Decimal point key.)
⑤
OK, Cancel key
The each setting for changing contents is saved by the OK key. And, the “Parameter” can be
returned not change by the Cancel key.
⑥
No selected range
The gray color is displayed that cannot be selected now. In this case, can be selected by presses
OK key (or Cancel key) returning to “Parameter”.