8-10
8.9 Setting the SNTP client function
[Description]
Use the SNTP client function to receive the time data from the time server on a regular basis to correct the
recorder's time.
[Operation]
On the system setting screen, select Comm. key
⇒
SNTP1 key to open the SNTP function setting
screen.
①
Current time and date
Displays the current time and date.
②
Selection of SNTP client function
Select ON/OFF of the SNTP client function.
ON: Receives the time data from the SNTP server and calibrates the time.
OFF: The SNTP function is not used.
When the correction of the time is attempted using the SNTP function during the recording
process, the correction is not performed if there is a difference of ±5 minutes or more from the
current time. If the difference is 5 minutes or less, the correction is performed by reducing the
difference little by little so that the time approaches the current time.
③
Setting of SNTP server address
Set the SNTP server address.
Input a SNTP server address on the character input screen, and then touch the OK key to set it.
④
Calibration cycle time
Set the time calibration cycle for the SNTP server. (1 to 200 hours)
Input a time calibration cycle on the numerical value input screen and touch the OK key to set it.
⑤
Calibration start
By touching and selecting the key for
⑤
" Calibration start ", the time calibration starts
immediately regardless of the setting in
④
"Calibration cycle time".
Note) During the recording process, manual calibration cannot be implemented.
①
Current time and date
②
Selection of SNTP function
③
Setting of SNTP server
address
④
Calibration cycle time
⑤
Calibration start