Timken ROLLON CTU 220-1I, User Manual

Page: 35 / 48

UM-33
Cobot Transfer Unit
After selecting the size, select the cor-
rect “Stroke” from the popup menu.
The stroke is visible on the axis’ label.
Be sure to activate the flag “Enable
URCap” before going on with the next
steps.
If you only have one CTU in your net
configuration, the IP configuration will be
automatic. In case you have 2 cabinets,
you’ll need to set a separate IP address.
In this case, go to the “Installation” tab of
the menu, select “Rollon” and then click
on the button “Debug”. Flag the “Cus-
tom” button, set the new IP address and
press “Set IP Address”.
IP connection
Fig. 65
Fig. 66
Fig. 67