ENGLISH – Tiki medical
25
3.2 Prepare the mask for use
1. Refer to figure 1 in paragraph 2.1 Description on page 12
2. Attach the harness (1d on figure 1) to the mask (1a on figure 1)
3. Evaluate whether the chin protection (part number 1055-01) is to be installed.
Stick the chin protection on to the surface in front of the exhalation valve.
4. Position the internal blower as to figure 5
5. Hold the blower on the inside of the mask and while holding it,osition the
inhalation filter in a 30° angle to the blower as to figure 6.
Observe the direction to the face as indicated with the text and arrows:
‘This side to the face’
6. Turn the inhalation filter (white) from the 30° to a 0° angle to attach the inhalation
filter (white) to the blower, as to figure 7a
30°
7. Position the exhalation filter (green) in a 30° angle to the axes of the mask as
to figure 6.
Observe the direction to the face as indicated with the text and arrows:
‘This side to the face’
8. Turn the exhalation filter (green) from the 30° to a 0° angle to attach the
exhalation filter to the mask, as to figure 7a
