ENGLISH – Tiki medical
35
5.1 Cleaning the Tiki medical mask
1. Ensure that the blower is never immersed in fluids.
If automated machines to clean the mask(s) are in use, remove the filter, blower
and as necessary the harness from the mask.
2. Prepare the following to clean the Tiki respiratory mask:
› A disinfectant agent in regard to the hazardous environment and / or
biological agents
› A washable brush or paper towels to clean with water
› Water and a mild detergent
› A bath or sink with water and a (mild) detergent
› A tap over a sink with warm running water
› A washable cloth to dry
3. Apply the disinfectant agent to the entire mask to remove biological agents.
Obey the instructions of the manufacturer of the disinfectant agent in regard to
temperature, time, other treatment etc.
4. To clean the mask, use: a paper towel or brush to clean, the mixture of water and
mild detergent.
Do not use any solvents.
5. Immerse the mask in a water bath with detergent
6. Rinse the mask under warm running water
7. Either use the cloth to dry the mask or leave the mask to dry in open air
8. To the procedures of either the user or the organisation that holds responsibility
over the user:
a. Dispose the cloth and the water with mild detergent
b. Clean the brush
9. Apply the disinfectant agent to the entire mask again to remove biological agents.
Obey the instructions of the manufacturer of the disinfectant agent in regard to
temperature, time, other treatment etc.
10. If necessary, in regard to the hazardous environment and / or biological agents,
repeat steps 3 to 9 of this procedure
