background image

V1007WBPLUIa, Rev.0.1 

1/2 

 
 
 
 

USER INSTRUCTIONS 

N95 PARTICULATE RESPIRATOR 

N95 Respirator AG-W01/AG-B01 

NIOSH N95 (U.S. standard 42 CFR Part84) APPROVED 

 

 

WARNING 

Although this Respirator is useful from a particulate substance with

detrimental nature to protection, the risk concerning illness or 

infection is not completely avoidable. If the usage is mistaken, it 

may get sick, or die and result. Please read a handling description 

and be sure to follow directions of a superintendent before use.

 

【INTENDED USE】 

This respirator, when worn to cover the mouth and nose, prevents inhalation of harmful particulates in the atmosphere. 

This respirator is intended for medical use; it is not intended for welding or other industrial use in dusty areas. 

This respirator conforms to the Guidelines for Preventing the Transmission of Mycobacterium tuberculosis in Health-Care 

Facilities of the CDC (Centers for Disease Control and Prevention, United States Department of Health and Human Services) and 

therefore can be used as a protective respirator to prevent tubercle bacillus infection in hospitals. 

Before occupational use of this respirator, a written respiratory protection program must be implemented meeting all the 

requirements of OSHA 29 CFR 1910.134 such as training, fit testing, medical evaluation, and applicable OSHA substance specific 

standards. 

The product can be used to protect users from fine particulate substances (0.1 mm or greater) generated from operations involving 

electric and laser scalpels and from other medical equipment. 

This respirator uses a filter proven to have a BFE (bacteria filtration efficiency) value of 99.9% or higher in a BFE test conducted in 

accordance with the MIL-M-36954C protocol (JIS L 1912).

 

This respirator cannot be used in areas where harmful gas, vapor, or oil mist is present, or used in environments in which oxygen 

levels are unknown or 19.5% or less. Do not use the respirator if the type or concentration of the harmful substances as well as the 

oxygen levels is unknown. 

S - Special or Critical User's Instructions:

 The model, AG-W01/AG-B01 filtering facepiece respirators has been manufactured by 

Approval Holder, Japan Vilene Company, Ltd. for Unicharm Corporation under TC-84A-5039. 

 

【USE INSTRUCTIONS】 

 1. Before putting on this respirator, check for any irregularities (warping or damage to facepiece, improperly-attached nosepiece, 

problems with fitting sponge, soiling inside the respirator, insufficient elasticity of straps, broken straps, improperly-attached 

and damage with strap attachment tools, etc.).    If you find a defect, exchange the respirator for one without defects.   

  2. Enlarged holes resulting from ripped or torn filter material around the weld strap attachment tools are considered damage. 

 3. Do not use if you have a beard. A beard can create gaps between the respirator and your face, affecting the ability of the 

respirator to provide protection. 

  4. Follow the Fitting instructions. If the respirator is worn incorrectly, harmful dust may enter and endanger your health. 

  5. Do not place any barriers between the respirator and the face as doing so may allow particulates to enter the breathing zone. 

  6. Avoid putting the respirator on and removing it in areas where harmful dust is present. 

 7. If the respirator is determined to be faulty during use, if blood, bodily fluids, or the like passes through the respirator, or if the 

wearer encounters difficulty breathing to a degree that impedes his/her work, replace with a new respirator. 

 8. Do not wash the respirator. Doing so will impair protective performance; the respirator body will deform, eventually resulting 

in leakage. 

 9. If the respirator is used as part of hospital-infection personal protective equipment (PPE), use gloves, goggles, and other 

protective wear as well, and take the appropriate special measures for facilities, such as maintaining sickrooms at negative 

pressure. 

10. Do not modify respirators in any way.    Modifications may affect the fit of the respirator, resulting in leakage. 

11. After removing a respirator, never put it back on.    Use a new respirator. 

12. If you have respiratory problems or feel unwell, immediately see the doctor. 

 

【RESPIRATOR STRUCTURE】 

 
 
 
 
 
 

 
 
 

Be sure to read this manual carefully prior to use. 

After reading this manual, store it in a safe location for future reference. 
If it is lost, contact us immediately for a replacement. 

 

Thank you very much for purchasing Respirator.

 

Nosepiece 

Fitting Sponge 

Strap Attachment 
tool 

Strap 

Facepiece 

Strap 

Nosepiece 

Reviews: