Tiernan TE3000, Installation And Operation Manual

Page: 6 / 114

iv Preface
Issuing Commands
Tasks and examples are presented in a series of step-by-step instructions.
Commands or information that you enter into the system appear in a different
type, as shown in the following example:
To restore the factory default configuration, select
config>default>restore
from the front panel, or issue the remote
command
mc load_def
.
If the command contains variable information that is to be typed into the system,
the variable information is found within karats < >. In the following example, you
would type
CPA
then the correct value for
<packet address>
.
Type
CPA <packet address>
Front Panel Navigation
This manual uses right angle brackets (>) to indicate a sequence of menus,
submenus, and menu items.
For example, select
Control>Clock>Date>June 03, 2003
means:
!
From the control menu, select clock.
!
From the clock menu, select date.
!
At the date option, enter the date, June 03, 2003, in the correct format.
Displays
The system may return values and messages on a front panel LCD, remote
terminal, or both. In this manual these values and messages appear in a different
type:
date = 06/23/2003
restore = default1
Revision History This manual is periodically updated and revised. For documentation updates, call
Tiernan Customer Service.
Revision Date Type of Revision
A 07/13/00 Initial release of the manual. Compatible with TE3000 firmware
version 1.70.
B 08/18/00 Updated front panel command to reflect new menu structure.
Compatible with TE3000 firmware version 1.81 build 3.
C 07/02/01 Updated front panel and remote commands to reflect new features;
updated Tiernan Radyne ComStream corporate information.
Compatible with TE3000 firmware version 2.00 build 20.