manualshive.com logo in svg

TIDI Zero-Gravity, Manual

Share
Download
TIDI Zero-Gravity Manual Download Page 8

Preventative Maintenance Checklist (81000)

8

Zero-Gravity

®

 Radiation Protection System Preventative Maintenance Checklist   

Safety Symbols 

Important information in this document is marked with symbols and keywords. Keywords 

such as 

WARNING, CAUTION, Material Disposition Notice, 

or 

ATTENTION

 indicate the 

level of risk involved. The symbols emphasize the message visually. 

 

 

WARNING! 

Indicates a potentially hazardous 

situation, which could result in a 

serious risk of injury or death to 

patient or operator and or damage to 

equipment or property. 

 

 

CAUTION!

Indicates a potentially hazardous 

situation, which could result in a minor 

or moderate risk of injury to patient or 

operator and or damage to equipment 

or property. 

ATTENTION!

(Without safety alert symbol) 

Indicates a situation that may result in 

damage to equipment or propert

y.

 

 

 

Material Disposal Notice 

Indicates the need to follow local 

regulations for the proper disposal of 

materials containing lead.

 

NOTE 

Useful additional information and tips. 

Summary of Contents for Zero-Gravity





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands