manualshive.com logo in svg

TIDI Zero-Gravity, Manual

Share
Download
TIDI Zero-Gravity Manual Download Page 6

Preventative Maintenance Checklist (81000)

6

Zero-Gravity

®

 Radiation Protection System Preventative Maintenance Checklist   

ZG System Information 

The preventative maintenance instructions in this document refer to the Zero-Gravity

®

 

Radiation Protection System with the following identification: 

 

●

Manufactured for: 

TIDI Products, LLC 

 

●

Product name: 

Zero-Gravity

® 

Radiation Protection System 

 

●

Type designation: 

Floor Unit (ZGM-6-5H), Hinged Swing Arm (ZGHSA), Monorail   

 

Hinged Swing Arm (ZGCM- HSA), Monorail 48 (ZGCM-48) or 66 inches  

 (ZGCM-66) 

 

●

Serial Number: 

See Identification Tag (Figure 37, 38, 39, 40, & 41) 

 

●

Sterile covers manufactured by: 

TIDI Products 

 

●

Authorized representatives: 

See Declarations of Conformity. 

 

●

Manufacture date: 

See Identification Tag (Figure 37, 38, 39, 40, & 41)

 

● Conforms to Annex II, Personal Protective Equipment (EU) Regulation 2016/425    

 

Category III, and as brought into UK law and amended. 

Manufactured for:  

 

TIDI Products, LLC  

 

570 Enterprise Drive 

 

Neenah, WI 54956 USA

 

Phone: 1.800.521.1314 

 

+1.920.751.4300

 

www.tidiproducts.com

0086

NOTIFIED BODY

APPROVED BODY

BSI Group The Netherlands B.V. 

Say Building  

1066 EP Amsterdam  

The Netherlands

BSI Assurance UK Ltd

Kitemark Court,

Davy Avenue Knowlhill

Milton Keynes, MK5 8PP UK

Intended Use 

Zero-Gravity

®

 Radiation Protection System 

See 84000 Users Guide for 

Intended Use

 

Leaded Acrylic Shield 

See 32577 Installation and Users Guide for 

Intended Use

 

Summary of Contents for Zero-Gravity





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands