manualshive.com logo in svg

TIDI Zero-Gravity, Manual

Share
Download
TIDI Zero-Gravity Manual Download Page 35

Preventative Maintenance Checklist (81000)

35

Zero-Gravity

®

 Radiation Protection System Preventative Maintenance Checklist   

Figure 32: ZGCMRS Shield Attachment Point

(4) 8-32 X 

1.25” LG 

Screw 

Swivel Arm Hardware Inspection 

1.     While the system is not in use, inspect all hardware on the swivel arm to ensure 

they are in place and fastened tightly. 

2.     Remove the cover on the upper arm to ensure correct hardware is in place. 

(Figure 34) 

3.     Ensure the Phillips head screw, lock screw, and key are in place and secure 

where the shield arm is inserted into the lower arm. (Figure 35) 

4.     Contact a TIDI Products authorized representative or TIDI Products service for 

repairs and / or replacement of components. Replacement and repairs may only 

be completed by TIDI Products authorized personnel. 

5.     If additional support is needed, contact TIDI Technical Service using the provided 

contact information. 

Figure 33

Slide 

Cover 

Upper 

Arm 

Lower 

Arm 

Cover 

Summary of Contents for Zero-Gravity





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands