Zero-Gravity® Radiation Protection System Uncrating Instructions
19
Floor & Ceiling Mounted Units
ZGM-6-5H | ZGHSA | ZGCM-HSA | ZGCM-48 | ZGCM-66
Unpack the Contents
1. Remove and set aside the boxes from crate.
2. Remove Foam Block 1 and carefully set aside the system components
(Figure 9).
WARNING! RADIATION HAZARD
The body shield must be handled with care so that it is not damaged
due to contact with other objects. If the body shield is damaged, it must
be rechecked according to the Maintenance section of the User’s Guide
(TIDI Products document 84000).
3. Leaving the protective foam cover intact, carefully remove the body shield
assembly and place them on a clean, flat surface. The protective foam cover
must remain in place until final installation.
4. Remove the (2) shoulder shields.
5. Remove foam block 2.
Figure 9
Protective Foam
Cover on Face Shield
Body Shield
Between Foam Blocks 1 & 2
Foam Block 1
Remove System
Components from Cavity
Column
Foam Block 2
