Floor & Ceiling Mounted Units (82000)
38
Zero-Gravity
®
Radiation Protection System Uncrating Instructions
Unpack Boom Arm Assembly
CAUTION: HEAVY EQUIPMENT
Use care when handling the Boom Arm assembly. The Boom Arm
assembly weighs ~ 40 pounds (18 kilograms) for the ZGM-6-5H, ZGHSA,
ZGCM-HSA and ZGCM-48, and the ZGCM-66 weighs ~ 50 pounds (23
kilograms). Two people are required for handling.
1. Remove screws (locations marked below in red) holding Boom Straps (1 on each
end) to Boom Crate Floor.
2. Remove Boom Arm Assembly.
Figure 31
Boom Arm Assembly
Beware of collisions with other objects.
Unpack Rail Assembly and Swivel Boom Assembly
CAUTION: HEAVY EQUIPMENT
Use care when handling the Rail Assembly. The Rail Assembly weighs
~ 150 pounds (68 kilograms), the Swivel Boom Assembly weighs ~ 95
pounds (43 kilograms) and must be handled by two people.
1.
Remove the screws (locations marked below in red) in the Wood Blocks (located
on the Crate Floor) that secure the Rail Assembly.
2. Remove the screws in the straps securing the Swivel Boom Assembly.
