Floor & Ceiling Mounted Units (82000)
4
Zero-Gravity
®
Radiation Protection System Uncrating Instructions
Important Information
Read this Manual Before Starting to Work!
This information is necessary for the safe and efficient operation of the equipment.
This document should be stored with, or in the immediate vicinity, of the unit.
Zero-Gravity Document List
● 81000 – Preventative Maintenance Checklist
● 82000 – Uncrating Guide
● 83000 – Installation Guide
● 84000 – User’s Guide
Zero-Gravity
®
Radiation Protection System is a registered trademark of TIDI Products, Inc.
United States Patents 7,973,299; 8,207,516; 8,558,204; 8,598,554 B2; 8,925,553;
8,933,426
For U.S. and Foreign Patent information, see //go.tidiproducts.com/patents Additional
Patents Pending
The contents of this publication may not be reproduced, copied, or translated in whole or in
part without prior consent from TIDI Products.
Pursuant to continuous product improvement, TIDI Products reserves the right to change
the equipment design and technology at any time.
All rights under the copyright laws are expressly reserved by TIDI Products.
Within the bounds of the legal requirements, the manufacturer is only responsible for
the technical safety characteristics of this apparatus if the maintenance, repairs, and
modifications to this apparatus are performed by TIDI Products or an approved TIDI
Products representative.
The Zero-Gravity
®
Radiation Protection System can also be referred to as Zero-Gravity or
Zero-Gravity System.
The Zero-Gravity Radiation Protection System is available in the following options:
Floor Unit (ZGM-6-5H)
Monorail (ZGCM-48 and ZGCM-66)
Hinged Swing Arm (ZGHSA)
Monorail Hinged Swing Arm (ZGCM-HSA)
This guide applies to Zero-Gravity Systems manufactured after November 2019. For
models prior to November 2019, some features may not apply. Contact TIDI Products
service for additional information.
