manualshive.com logo in svg

TIDI Zero-Gravity ZGCM-48, Instructions Manual

Share
Download
TIDI Zero-Gravity ZGCM-48 Instructions Manual Download Page 6

Floor & Ceiling Mounted Units (82000)

6

Zero-Gravity

®

 Radiation Protection System Uncrating Instructions

Intended Use 

Zero-Gravity

® 

Radiation Protection System 

See 84000 Users Guide for Intended Use

Foreseeable Misuse 

Zero-Gravity

®

 Radiation Protection System

 has risk and other foreseeable misuse 

conditions that are identified in the 

Safety Symbols

 section of this document. Please read 

this document in its entirety before using this equipment. 

Uncrating Instructions 

 

● This document is intended to provide guidance for the proper uncrating of  

 

Zero-Gravity floor unit and is used to train personnel. 

 

● It is essential that all personnel removing equipment from the crate read this  

 

 

document, in its entirety, with special consideration to keywords and symbols. 

 

●

Particularly helpful information is italicized. 

 

●

Personnel removing equipment from the crate should refer to TIDI Products  

 

 

document 82000 (Uncrating Instructions). 

 

●

Installers should refer to TIDI Products document 83000 (Installation Guide). 

 

●

Users should refer to TIDI Products document 84000 (User’s Guide).

 

●

For additional information contact TIDI Products service at +1.920.751.4300.

 

Summary of Contents for Zero-Gravity ZGCM-48














































Reviews:

No comments

Brands by name

Popular brands

Load more brands