Thunder Laser NOVA-24 User Manual Download

Page: 48 / 77

THUNDER LASER

NOVA-24

www.thunderlaser.com

DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD

[email protected]

Shatian Town, Shatian Dadao, Mintian

Tel :(86)769 826653

Dongguan City, Guangdong Province, China



Current work time

: To forecast the running time of the current file(the current

file No. is showed on the main interface), and the time is accurate to 1ms.



Clear all count

: To clear the running times of every file in the memory



Delete all file

: To delete all memory files



Format speedily

: To format memory speedily, and then all the files in memory

will be deleted.



Format drastically

: To format memory drastically, and then all the files in

memory will be deleted.

Total

: the total running times of all the files.

2). U-Disk File

If the “U-disk+” entry is pressed, you can copy your file from USB flash drive to your

machine.

Summary of Contents for NOVA-24














































































Search results

Summary of Contents for NOVA-24

Reviews:

Related manuals for NOVA-24

Brands by name

Popular brands

Thunder Laser NOVA-24, User Manual

Search results

Summary of Contents for NOVA-24

Reviews:

Related manuals for NOVA-24

Brands by name

Popular brands