Thunder Laser NOVA-24 User Manual Download Page 62

Page: 62 / 77

THUNDER LASER

NOVA-35

www.thunderlaser.com

DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD

[email protected]

Shatian Town, Shatian Dadao, Mintian

Tel :(86)769 826653

Dongguan City, Guangdong Province, China

The particular values are showing with a picture in the USB flash drive and on the

Anodized aluminum piece that came with your machine.

Save those setting on the “Scanning(Reverse compernation)” check box.

6. Create sample text for engraving directly on RDworks, then set up the parameter and

download the file to your machine.

More details for how to use software please watch the instruction video below.

https://www.thunderlaser.com/video/how-to-use-your-laser-software.html

7. Click “Original” and “Frame” on the display, please make sure that the material is in the

right location and there is enough space for working.

①

Control arrow button to move the laser head;

②

Click “Origin” button to select the start point;

Summary of Contents for NOVA-24














































































Search results

Summary of Contents for NOVA-24

Reviews:

Related manuals for NOVA-24

Brands by name

Popular brands

Thunder Laser NOVA-24, User Manual

Search results

Summary of Contents for NOVA-24

Reviews:

Related manuals for NOVA-24

Brands by name

Popular brands