Thunder Laser NOVA-24 User Manual Download

Page: 42 / 77

THUNDER LASER

NOVA-24

www.thunderlaser.com

DONGGUAN THUNDER LASER EQUIPMENT CO.,LTD

[email protected]

Shatian Town, Shatian Dadao, Mintian

Tel :(86)769 826653

Dongguan City, Guangdong Province, China

4.4 How to use the display

4.4.1

Function of the Buttons



Arrow buttons: control the movement of the laser

head.(also can be used to change the parameters in the control panel)



Z/U button: The Z/U key can be pressed when the system is idle or the work

is finished. On pressing this key, it will show some entries in the interface, each entry

includes some functions, Z axes move, U axes move, each axes to go home etc.



Reset button: Reset the machine.



Pulse button: Pulse a laser beam.



Speed button: Set the speed of the current running layer, or

set the arrow

buttons’ move speed.

Summary of Contents for NOVA-24














































































Search results

Summary of Contents for NOVA-24

Reviews:

Related manuals for NOVA-24

Brands by name

Popular brands

Thunder Laser NOVA-24, User Manual

Search results

Summary of Contents for NOVA-24

Reviews:

Related manuals for NOVA-24

Brands by name

Popular brands