Thrane&Thrane TT-3064A, User Manual

Page: 141 / 152

Appendix K - AT Command Set
15Oct99
Page K-11
+IPR This command specifies the data rate at which the
Capsat® Telephone will accept commands.
The <rate> parameter specifies the rate in bits per
second at which the DTE-Capsat® Telephone
interface will operate. If the parameter is omitted the
factory setting <rate>=9600 will be used.
+IPR=<rate> Set data rate
+IPR? Display current setting
+IPR=? Display available setting
<rate> 1200
2400
4800
9600
+W This command returns the extensions to the PCCA
STD-101 supported by the Capsat® Telephone.
+W Display extensions
+W=? Return OK result code
+WKSIZE This command sets the maximum ARQ window size
for subsequent data calls using ARQ mode.
The <n> parameter specifies the maximum ARQ
window size. If the parameter is omitted the factory
setting <n>=15 will be used.
+WKSIZE=[<n>] Set window size
+WKSIZE? Display current setting
+WKSIZE=? Display available setting
<n> 1-63
factory setting: 15
+WINMARSAT This command returns all the “+W<text>“ commands
for use with +WS46=11 (the only valid value).
+WINMARSAT Display commands
+WINMARSAT=? Return OK result code
+WLES This command selects the LES for the next outgoing
data call.
The <nnn> parameter specifies the LES Access Code
and must consist of three digits and be available in
the Bulletin Board. If the parameter is omitted the