Thrane&Thrane TT-3064A, User Manual

Page: 63 / 152

Menu System
15Oct99
Page 47
If the entry is successfully inserted the Capsat® Telephone displays the message 'Entry
stored'. Otherwise an error message is displayed.
NOTE: The phone book cannot be accessed if empty. The first entry must therefore be
inserted directly.
Edit Entry
The Edit-function can be used to display, update or overwrite an entry. The procedure is
much the same as above for inserting entries and the CONFIG PIN must be entered if phone
book Dial is enabled.
First select the entry to be
modified in the phone book BE
Then select the EDIT function GB
To accept the displayed field
press C
To delete it press D
Modify the field and then:
To accept the new value
press
C
To restore the old value press
A
If the short code has been modified to an already existing short code, then the display will
show
Entry
exists
until a key is pressed and prompt for an overwrite accept:
Overwrite
No
To toggle between Yes and No press BE
To accept selection press
C
To restore the old value press
A
You can display an entry after having selected the Edit-function simply by using the
C
-key
or the BE -keys without making any change to the contents. The entry will only be
updated if changes really are made.
If you make any change of the contents the entry will be updated and stored. The Capsat®
Telephone displays the message 'Entry stored'. Otherwise an error message is displayed.
Delete Entry
How to delete an entry from the phone book :
Select Entry to delete BE
Select Delete-function
GF
The Capsat® Telephone
displays
Delete entry
No
To toggle between Yes
and No press
BE
Confirm selection with C
or cancel delete A