Thrane&Thrane TT-3064A, User Manual

Page: 41 / 152

Call Types
15Oct99
Page 25
4 4 C C
ALL ALL
T T
YPES YPES
The Capsat® Telephone distinguishes between three types of telephone calls:
•
Voice Calls
•
Fax Calls
•
Data Calls
Each of the three types of calls are routed to a separate connector on the terminal:
Call Type Destination
Voice HANDSET, or
AUX/FAX
connector
FAX AUX/FAX
connector
Data DCE port
If the PIN1 security key is enabled and the Capsat® Telephone is in sleep mode it is required
to login on the terminal handset, prior to making calls from an auxiliary telephone, a fax
machine or the data interface. However, it is always possible to receive calls.
N N
UMBERS UMBERS
There are four types of numbers which can be dialled from the Capsat® Telephone:
•
Subscriber Numbers
Ordinary telephone numbers of subscribers.
•
Short Codes
Two digit codes which refer to entries in the telephone book. The short code numbers
must always be preceded by
S when entered.
•
Service Codes
Also two digit codes (but not preceded by
S ) which refers to optional services provided
by the Land Earth Stations. See Appendix D for a list.
•
Local Numbers
With an auxiliary telephone connected to the AUX/FAX port it is possible to make local
calls from the handset to the auxiliary telephone and vice versa.
The local call codes are one digit numbers.
Dialling numbers is simple once connected with a LES:
From the handset just enter the telephone number and press either I , C or U to initiate
the call.
On the auxiliary telephone use the pound button
U
to initiate the call.
NOTE: When dialling short codes pressing U once the telephone number will be displayed
and a second press is required to initiate the call.
Number Formats
In the following the general dial formats for telephone numbers described.
All mandatory fields are marked <field>. All optional fields are marked [field]. All the fields
must be separated with
S . Leading optional fields may be left out completely, but if other
optional fields are left out you still have to enter an S to indicate an empty field.