Thrane&Thrane TT-3064A, User Manual

Page: 58 / 152

Call Types
Page 42
15Oct99
Data Mode
The Capsat® Telephone will enter the Data Mode when a connection is established with a
remote modem.
In Data Mode data can be transferred between the Capsat® Telephone and the remote
modem.
Online Command Mode
When the Capsat® Telephone is in Data Mode the Online Command Mode can be
entered, still keeping the connection, using the command ‘+++’ described below. The
Data Mode can be re-entered with the command ‘ATO’.
In Online Command Mode all the AT commands described below can be given.
AT Command Set
The commands which can be given to the Capsat® Telephone are specified in the PCCA
STD-101 and the ITU-T V.25ter standards. These standards consist of provisions and
references based on the popular AT Command Set described in the standards:
ANSI/TIA/EIA-602 and ANSI/TIA/EIA-615 together with some extended AT+I, AT+G and
AT+W Command Sets.
All command lines entered at the DTE must start with the letters ‘AT’. All command lines must
end with a press on the <return> key or more precisely the value specified in the S3 register
(see below). Several commands can be given in one command line. All available commands
are listed in Appendix K along with response codes.