Thrane&Thrane TT-3064A User Manual Download Page 109

Page: 109 / 152

Appendix F - List of Cause Codes

15Oct99

Page F-3

Invalid scrambling (12D2)

Call cleared by LES. Invalid scrambling vector sent during call
setup.

Invalid service (12A5)

Call cleared by LES. Service not authorised at this LES.

Invalid service address (13D1)

Call cleared by LES. Dialled number is invalid.

LES clear unspecified (11B5)

Call cleared by LES for unspecified reason.

LES congested (1155)

Call cleared by LES. No channel available.

LES congested (1156)

Call cleared by LES. No channel unit available.

LES congested (1254)

Call cleared by LES. No channel and circuit available.

LES long interruption (1166)

Call cleared by the LES because the LES has lost the
synchronisation with the MES for a long period.

Les No assignment (11C5)

Call cleared by LES. LES time-out due to no assignment received
from NCS during call setup.

LES time-out (112F)

Call cleared by LES. LES time-out due to no answer received
from MES.

LES time-out (12C5)

Call cleared by LES. LES time-out due to no dialled number
received from MES during call setup.

LES time-out (13C5)

Call cleared by LES. LES time-out due to no scrambling vector
received from MES during call setup.

LES time-out (14C5)

Call cleared by LES. LES timeout due to no dialled number and
no scrambling vector received from MES during call setup.

MES busy (1110)

Call cleared by MES. MES busy with another call.

Summary of Contents for TT-3064A
























































































































































Search results

Summary of Contents for TT-3064A

Reviews:

Related manuals for TT-3064A

Brands by name

Popular brands

Thrane&Thrane TT-3064A, User Manual

Search results

Summary of Contents for TT-3064A

Reviews:

Related manuals for TT-3064A

Brands by name

Popular brands