Thrane&Thrane TT-3064A, User Manual

Page: 140 / 152

Appendix K - AT Command Set
Page K-10
15Oct99
Extended AT+I, +G and +W Commands Extended AT+I, +G and +W Commands
The extended AT+I, AT+G and AT+W commands are non-standard
features compared with ordinary data modems. Some of the
commands are specially designed for the Inmarsat-phone mini-M
system. All the extended commands must end with a ‘;’. The factory
setting values for the commands are listed in bold.
+GCAP This command returns the major classes of extensions
supported by the Capsat® Telephone.
+GCAP Display classes
+GCAP=? Return OK result code
+GMI This command displays an identification of the
manufacturer.
+GMM This command displays an identification of the model.
+GMR This command displays the revision number.
+IFC
This command specifies the local flow control
between the DTE and the Capsat® Telephone (DCE).
The <DCE-DTE> parameter specifies how the DTE
controls the flow of data from the Capsat® Telephone.
If the parameter is omitted the factory setting <DCE-
DTE>=2 will be used.
The <DTE-DCE> parameter specifies how the
Capsat® Telephone controls the flow of data from the
DTE. If the parameter is omitted the value specified
by <DCE-DTE> will be used.
+IFC=[<DCE-DTE>[,<DTE-DCE>]] Set flow control
+IFC?
Display current settings
+IFC=? Display available settings
<DCE-DTE>
0 No flow control
1 XON/XOFF (software flow control)
2 RTS (hardware flow control)
<DTE-DCE>
0 No flow control
1 XON/XOFF (software flow control)
2 CTS (hardware flow control)