Thrane&Thrane TT-3064A, User Manual

Page: 51 / 152

Call Types
15Oct99
Page 35
Key Entries After Connection
During an end-to-end connection (incoming or outgoing satellite call) between the Capsat®
Telephone and the subscriber, additional key entries might be necessary for direct dialling
through PABX systems, voice response systems etc. The tones generated from pressing the
keys are called DTMF tones.
The handset must be out of the menu system to invoke DTMF tones. The keys which generate
DTMF tones are the number, pound, and the asterisk keys (
T - R , U and S ).
For the auxiliary telephone simply press the m - k , l and n -keys to invoke the DTMF
tone.
Microphone
During an end-to-end connection (incoming or outgoing satellite call) between the Capsat®
Telephone and a subscriber the microphone in the handset can be muted.
Press
GO on the handset to mute the microphone. Subsequently a press of any handset
key will set the microphone back to normal again.
The handset will display the messages ‘Microphone Off’ when the microphone is muted and
‘Microphone On’ when the microphone is back to normal. The handset has to be out of the
menu system to show these messages.
Call Transfer
During an end-to-end connection (incoming or outgoing satellite call) between the Capsat®
Telephone and the subscriber it is possible to transfer the call between the handset and the
auxiliary telephone connected to the terminal.
The call transfer is activated by pressing the ‘R’ -key. On the handset the ‘R’-key is
generated with the combination
GN .
Below an example is given:
A
UXILIARY
T
ELEPHONE
H
ANDSET
Satellite call established
o
(Local call of handset)
Ringing
I
Talk Talk
Place phone on-hook
Satellite call established
The unit having the satellite call can take back the satellite call at any time during the
procedure pressing the
o -key a second time.
Technically, the
o
-key makes an On-hook, Off-hook with a maximum spacing of 150 ms. If
the auxiliary phone does not have a o -key and is of good quality it might be possible to
simulate the key, flashing the hook switch.
If the call is billed each part of the call will be stored separately in the call log. The example
above will give two entries in the call log, one for auxiliary phone call and one for handset
call.
F F
AX AX
C C
ALLS ALLS
Fax calls can only be made or received if
•
The AUX/FAX port is configured to FAX.