Thrane&Thrane SAILOR 6110, Installation Manual

Page: 61 / 82

Chapter 5: Installation check and test
Testing the system 51
555
In
st
a
ll
a
ti
on c
h
ec
k and
te
st
The test is initiated.
Wait until the following window appears.
As long as the
Test in progress
window is showing, you can use Distress
buttons connected to the system under test, without sending a real
Distress Alert.
Important
Before pressing any Distress buttons, make sure the
display of the SAILOR 6006 shows Test in progress.
Otherwise you may accidently send a real Distress alert!
Note
Before pressing any Distress buttons, check the units as follows:
• On the alarm panel, make sure the display shows “Test” next
to the Inm C unit that is active (marked with a bullet), before
pressing the
Inm-C Distress
button.
• On the Message Terminal, make sure the display shows “Test
in progress” before pressing the
Distress
button on the
Message Terminal.