Thrane&Thrane SAILOR 6110, Installation Manual

Page: 29 / 82

Chapter 3: Installing the system
Mounting the SAILOR 3027 19
3333
In
st
a
ll
in
g
th
e s
yste
m
3.2.2 Mounting the SAILOR 3027 GMDSS Terminal
The GMDSS Terminal has one CAN connector and is designed primarily for
pole mounting.
Pole mount 1”
The pole mount kit is included with your
GMDSS Terminal. Follow the instructions
included with the pole mount kit.
1. Lead the cable through the pole and pole
mount adapter.
2. Connect the CAN cable to the terminal.
3. Mount the adapter on the terminal using
screws.
4. Tighten the adapter to the pole.
You may use the adjustable pole/railing mount as an alternative to the pole
mount. See the next section for details.
Note
For mechanical drawings, see Mechanical outline drawing, SAILOR
3027 GMDSS Terminal on page 22.
For information on wiring, see Connecting the system on page 27.
For part numbers of the mounting accessories, see Available parts
on page 59.
Note
The connector is waterproof.
Do not attempt to seal the
connection any further.
Note
The pole mount adapter must be removed from the terminal before
the cable can be connected or disconnected.