Thrane&Thrane SAILOR 6110, Installation Manual

Page: 52 / 82

Chapter 4: Connecting the system
42 Connectors and pin-out
4.5.3 SAILOR 6101/6103 Alarm Panel
Overview
If you need a Distress function for the Inmarsat-C GMDSS system only, you can
use the SAILOR 6101 Alarm Panel (one Distress button).
If, however, you need to use the Distress function for VHF or MF/HF as well,
you should use the SAILOR 6103 Multi Alarm Panel, which has 3 Distress
buttons, one for each system.
Both alarm panels have the following connectors:
• DC input.
Connects to the SAILOR 6081 PSU and Charger
• Ethernet interface.
Connects to the SAILOR 6197 Ethernet Switch
The drawing below shows the connectors on the SAILOR 6101/6103.
The next sub-sections show the pin-out for these 2 connectors.
For a complete description of the SAILOR 6101/SAILOR 6103 Alarm Panel, see
the Installation manual for the alarm panel
[3] .
Note
The alarm panel is not included as a part of the system.
Ethernet DC input