Thrane&Thrane SAILOR 6110, Installation Manual

Page: 6 / 82

iv
About the manual
2
Intended readers
This manual is an installation manual for the SAILOR 6110 GMDSS
System. The manual is intended for installers of the system and
service personnel. Personnel installing or servicing the system
must be properly trained and authorized by Thrane & Thrane. It is
important that you observe all safety requirements listed in the
beginning of this manual, and install the system according to the
guidelines in this manual.
Manual overview
Note that this manual does not cover how to use the system. For
information on usage refer to the user manual. Part numbers for
related manuals are listed in the next section.
This manual has the following chapters:
• Introduction contains an overview of the system.
• Unpacking and activation describes initial inspection and
explains how to activate the service.
• Installing the system explains how to mount the units.
• Connecting the system explains how to connect the units in the
system and shows wiring, pin-out and cable requirements.
• Installation check and test contains a check list for verifying the
physical installation and guidelines for testing the installation.
• Maintenance contains guidelines for handling, maintaining
and repacking the SAILOR 6110 system.