Thrane&Thrane SAILOR 6110, Installation Manual

Page: 30 / 82

Chapter 3: Installing the system
20 Mounting the SAILOR 3027
Adjustable pole/railing mount 1” and 1½” (optional)
The adjustable pole/railing mount kit is available from Thrane & Thrane (see
Available parts on page 59). When mounting the adjustable pole/railing
mount follow the instructions included with the kit. The adjustable pole/railing
mount fits 1” and 1½” poles and can be mounted on a vertical or horizontal
pole.
Do as follows:
1. Attach the pole/railing mount to the pole using the included nuts and
spacers. The drawing below and on the next page show the vertical and
the horizontal assembly.
2. Tighten the nuts.
3. Place the large spacer between the SAILOR 3027 GMDSS Terminal and the
pole/railing mount.
4. Fasten the GMDSS Terminalto the pole/railing mount using the 3 screws
and spacers.
5. Tighten the screws.
6. Connect the CAN cable to the connector in the bottom of the
GMDSS Terminal.
Vertical pole: