Thrane&Thrane SAILOR 6110, Installation Manual

Page: 49 / 82

Chapter 4: Connecting the system
Connectors and pin-out 39
4444
Co
n
n
ec
ti
ng t
h
e
sy
st
em
4.5.2 SAILOR 6006 Message Terminal
Overview
The drawing below shows the connector panel of the Message Terminal.
In the basic SAILOR 6110 system, the following connectors on the Message
Terminal are used:
• USB interface.
Connects to the SAILOR 1252 Printer and to the keyboard.
• Ethernet interface.
Connects to the SAILOR 6197 Ethernet Switch.
• , ground stud.
Connects to ship ground.
• CAN interface.
Connects to the GMDSS Terminal and optionally other equipment using the
CAN interface.
• DC Power input.
Connects to the SAILOR 6081 PSU and Charger
The next sub-sections show the pin-out for these 4 connectors.
For a complete description and pin-out for all connectors on the Message
Terminal, see the Installation Manual for the Message Terminal
[2] .
Ethernet DC Power CAN USB
GND