10
GETTING STARTED
OPERATION FROM HANDSET cont'd
cradle
(Part.no..106430)
SAILOR.33.Fleet+.features.a.specially.designed.cradle..
A.coiled.cable.(stretchable.from.60.to.300.cm).is.used.to.
connect.the.ISDN.Handset.to.the.cradle..The.cradle.makes.it.
possible.to.have.a.fixed.handset.installation..
In.order.to.answer.a.call,.press.
.or.select.
Speaker
or.
release.the.ISDN.Handset.from.the.cradle..When.placed.in.the.
cradle.the.handset.is.in.speakerphone.mode.during.calls.
Note!
The ISDN Handset is equipped with a magnetic switch carrying
out an off-hook operation when the handset is released from
the cradle, and an on-hook operation when it is replaced in
the cradle. Thus, an on-going call will be disconnected if the
handset is replaced in the cradle during the call.
The.cradle.is.provided.with.two.different.snap.versions.for.
securing.the.ISDN.Handset:
- A
standard
snap
.(part.no..106433)
performing a soft lock
of the handset when placed in the cradle. Allows the
handset to be inserted and released easily.
- A
strong
snap (
part.no..106433,.
the longer one) locking
the handset firmly when placed in the cradle. This snap
version requires that the snap is pushed upwards, away
from the handset, in order to release the handset.
Note!
When the strong snap is
used, it is required to push
the snap upwards when
pulling out the handset.
Position.the.lower.part.of.
the.handset.in.the.cradle..
Make.sure.it.fits.firmly..
Insert.the.upper.part.
of.the.handset.into.the.
cradle..A.click.should.be.
heard.when.the.snap.
locks.the.handset.in.posi-
tion..
When.releasing.the.hand-
set,.start.pulling.out.the.
upper.part.of.the.handset..
1.
2.
3.
Snap
Summary of Contents for SAILOR 33 Fleet+
