BP209 Series
7 Operation Instructions
Page 92
21424-D02
Note
Make sure the rotation mount is oriented upright so that the Y axis of the BP209 Series is loc-
ated vertically.
Press the
Start Wizard
button
. You will be requested to select whether you want to adjust
for M² or Divergence Measurement. Make your choice:
The wizard starts:
·
For a successful alignment, the optical power level must be adjusted in such way that the AD
Saturation is between 40 to 95 %. The green bulb to the right of the numeric field indicates
the "GOOD" range. During alignment this condition must not change!
·
After initialization, the stage is at Position 2 (200 mm). Click the capture button
of Position
2 - the centroid is captured, and its crosshair color changes to amber. As the actual beam
centroid that is marked by a blue crosshair, is located at the same position, the resulting
color is white:
Summary of Contents for M2MS
