THORLABS M2MS, Operating Manual

Page: 68 / 167

BP209 Series 7 Operation Instructions
Page 66
21424-D02
Handling Pass / Fail Test Settings and Results
Toolbar Symbol Associated Action
Save Calculation Results
Lock / Unlock Test Parameters
Load Test Parameter Configuration
Save Test Parameter Configuration
Save Calculations opens a dialog box to enter file properties (name, format, comments). For
details please see the Calculation Results section.
Lock By default, pass/fail test parameters are unlocked. They can be locked in order to prevent
manipulation of margins and parameters included in pass/fail test. Optionally, the lock can be
secured by entering a password.
Note
A password can be entered only once and cannot be changed! In case of troubles, please con-
tact
Thorlabs for a solution.
Load / Save Test Parameter Configuration.
The Load and Save buttons in the Calculation Results toolbar allow you to load and save the
configuration of the pass/fail test.
In order to reconstruct a pass/fail test configuration automatically with the next session, save
the parameter to a test parameter configuration file. This file will be loaded with the next start of
the application. If more than one configuration file is saved, the most recently saved file will be
loaded automatically.
To load a test parameter from a file click to the "Load Test Parameter" button and select the
test parameter configuration file.
7.1.3 Save Measurement Results
In addition to allowing the Calculation Results to be saved, the Beam Software will:
·
Export Device Data
·
Print Windows
·
Save a Test Protocol
47
162
47
67
69