background image

maInmEnU

P17

English

noTE:



 Please connect a correctly formatted USB storage device with the correct software 

file loaded to the root directory and then connect it to your receiver. After the receiver 

successfully has started the loading process (progress bar will be shown) please remove the 

USB device!

WaRnIng:



 NEVER disconnect the receiver from the mains or switch the power OFF during the update 

procedure. It can damage your receiver and warranty will void! As soon as the update 

is finished, the receiver restarts automatically! In case of a USB software update please 

consider that the receiver in certain cases may delete all channels, data and user settings.

noTE:



 The above mentioned USB functions require a correctly formatted USB storage device to be 

connected to the receiver.

7.2.5oTasoftwareUpdate

The OTA (Over the Air) function allows you to search for software updates available on ASTRA 

23.5 satellite. Please ask your local THOMSON dealer or visit our website www.thomsonstb.net 

for information.

After pressing 

ok

 on 

OTA Software Update

 to execute your receiver will start looking for new 

software. Follow all instructions that are displayed on screen. If an update is available choose 

Download

 with 

pq

 and press 

ok

 to start the update process.

WaRnIng:



 After the update the receiver restarts automatically! During the update process NEVER 

disconnect the receiver from the mains, switch power OFF or disconnect the receiver from 

the antenna cable! This can damage your receiver and warranty will be void! In case of 

a USB software update please consider that the receiver in certain cases may delete all 

channels, data and user settings.

7.3Conditionalaccess

Your receiver is equipped with a smart card slot which allows access to Irdeto encrypted 

services.

Depending on your smart card you can read different information that might also be asked 

from your broadcaster in order to give the most effective support. The programmes that can 

be descrambled are determined by the smart card respectively the subscription which you 

use. This sub menu gives you access to advanced functions and information in respect to 

your Irdeto smart card if it is inserted. The following menus are available: 

Irdeto Status

Mail

 and 

Maturity Rating

.

7.3.1Irdetostatus

This menu gives access to following submenus which can be opened for detailed information 

about these items: 

Smart Card Status

EMM Status

ECM Status

Loader Status

Product List 

Status

 and 

PVR DRM Service

.

7.3.2mail

This menu allows access to Irdeto mail. This is used for sending important information from 

broadcaster to you. At the moment you receive a mail you will get a mail message on screen.

Please, go then into this menu to open the message from broadcaster.

7.3.3maturityRating

In this menu you can define a new maturity rating group or delete an existing maturity rating 

group.

Enter the 

maTURITYRatingPIn:givenbytheoperator

 in order to access this menu. In 

the Maturity rating menu you can choose to use the broadcasted maturity rate via the CA 

(Conditional Access) System. This means that when an Irdeto scrambled channel broadcasts 

Summary of Contents for THS812




























Reviews: