background image

P18

maInmEnU

a defined rate for a movie or special event you can use this setting to protect children from 

watching improper content for their age. These PIN codes are also used to start playback 

of a recording with protection. The availability and access of this menu depends on if the 

broadcaster supports/opens this function.

 Maturity Rating Master PIN

:

 

  Use the 

0~9

 buttons to access this menu options. Enter the 

maTURITY

RaTIngPIn

.

 Maturity Rating action

:

 

  Use 

tu

 to set 

ON

 or 

OFF

. If 

OFF

 is set the function is deactivated. If a 

profile has been setup the menu now contains following settings as well:

 Maturity rating group

: Displays the chosen rating groups, starting with “0”. When more than one 

profile was setup you can choose one with 

tu

.

 

Age

:  Displays the age for the rating group above.

  User PIN Code

:  Displays the PIN code for the rating group/age above.

addmaturityratinggroup

Press the 

RED

 button to create a new profile for a specific age.

 Maturity rating group

: Displays the chosen rating groups, starting with “0”.

 

Age

:  Use 

tu

 to change the age between 

4

 – 

18

 years.

When finished use 

pq

 to select 

Save

 to apply or 

Cancel

 to return to the menu.

When you save the age setting the receiver displays a generated PIN code. Please note this 

PIN code for access to watching content.

Deletematurityratinggroup

Use 

tu

 to change to the maturity rating group you want to delete and then press 

gREEn

 to 

delete it.

noTE:



 For watching a certain movie the receiver will request to enter the maturity rating PIN code. 

You can create up to 6 different profiles, which can also be deleted again. When setting a 

profile for a certain age, please consider that the set PIN code is generated for this specific 

age only and should be noted by an adult. Generally you can use the master PIN for every 

age restriction and by entering it you can also check the PIN for the different maturity rating 

groups.

WaRnIng:



 The maturity rating function might have influence on the recording timer behaviour if the 

maturity rate for a programmed event differs to the rate of a previous movie. This will lead to 

a new PIN enter request or the receiver enters the automatic standby mode in the meantime 

and so also requests the PIN.

The master PIN of your smart card can only be changed via the operator

7.4Channelmanager

In this menu you can manage channels and configure favourites, define an automatic channel 

update or from a connected USB storage device. The menu consists of the following sub-

menus: 

TV Channels

Radio Channels

Auto Channel Update

TV Programme Guide

 and 

HDD 

Manager

. Choose a sub menu with 

pq

 and press 

ok

 to advance.

7.4.1TvChannels

Use this menu to manage your TV channels. The current channel list is displayed to the left and 

the favourite group to the right.

addchannelstofavouritegroups

Use 

pq

 to select a channel and press 

ok

 to add it to the favourite group. Press 

gREEn

 to 

change between 6 available favourite groups. To remove a channel from a favourite group use 

u

 to change to the right side, then use 

pq

 to select the channel you want to remove from this 

Summary of Contents for THS812




























Reviews: