P20
maInmEnU
7.4.5hDDmanager(PvR)
The HDD Manager menu allows you to select a recording file for
Playback
,
Delete
,
Lock
and
Rename
. It allows you to select another
Partition
and/or
Format
for the connected HDD into
FAT32.
Make sure you have connected your external HDD to the USB port on the rear panel on which
you made recordings before.
Playback
Use
pq
to highlight a recorded file and
ok
to start playback. Some recordings can be
showing a lock symbol which is set automatically if an event had an age level or 18+ protection.
Please, enter this PIN code if the receiver asks for it before playback can start. The PIN can be
the master PIN given by the operator of the smart card. The PIN can be also one of the PINs of
your created Maturity groups in the
Maturity Rating
menu.
If a recording has an age level from the event it will be shown in this menu. This recording can
also be played back with the belonging PIN code(s).
Note: Please, contact your operator if you lose the master PIN code. You recordings are not
lost and can be reopened again with the new master PIN after you follow their instructions.
Playback is only possible on the receiver on which the recording was made. Playback on
multimedia players is not possible as the recorded files are encrypted and protected.
Deletearecord
Use
pq
to highlight the recorded file you want to delete permanently from your external HDD.
Press the
RED
button and then select
OK
and press
ok
to delete.
formathDD
Press
gREEn
to format the connected HDD into FAT32. You can use this function when you
are using a brand new external HDD or USB device to format it into the correct FAT32 format
which is needed to make recordings on this device or if you have made many recordings and
no more recordings are allowed. You can delete all these at once and it allows you to make
new recordings again.
WaRnIng:
This will delete all data, information and recordings from the external HDD and is irreversible!
THOMSON cannot guarantee this function for all USB devices and cannot be responsible
for loss of recordings or data.
TIP:
If you time to time make a copy from this external HDD to another HDD by using a computer
it will protect some recordings should they have gotten lost or damaged on the currently
used HDD.
lock
Use
pq
to highlight the recorded file you want to lock with a PIN code before you can play
back it.
Press the
YElloW
button and then enter the PIN to set the lock. Be aware that the receiver
has no unlock function, so you are not allowed to remove recording locks.
Partition
Press
blUE
to change the
Partition
on the connected external HDD.
This function can only be used if you have made more partitions of the HDD by using a
computer before. It allows you to select on which partition you will store the recordings. After
you have selected another partition, press
ok
to store the selection.
Rename
Use
pq
to highlight the recorded file you want to rename.
Press
mEnU
and select rename and press
ok
2 times! A keypad appears and with the
number buttons on the remote control you can create a new name. This function works on
