Installation, use and maintenance guide
COMPACT S22
–S26–S32 EVO5
Page
23
ENG
6.2 DESCRIPTION OF THE POWER PANEL
The components of the power board are described below:
1) Electrical power outlet 220V-240V 50Hz
2) Main switch 0/I.
3) Test light for pellet feed motor.
The light comes on simultaneously with the activation of the pellet
feed motor.
4) Cap for reset thermostat button.
If the reset thermostat overheats stop the pellet feeder. The appliance
must cool down before you can restart the appliance. After verifying
and eliminating the causes of the event, undo the protective cap and
press the button.
5) Protection fuse 3.15 A.
6.3 DATE/TIME: SETTING THE DATE AND TIME
The appliance must be energised and the I/0 switch in position “I".
The current date and time can be set using the DATE/TIME function.
To set the current time and date proceed as follows:
1) Press the
Menu Button
once to view the
following screen:
2) After a few seconds the following screen will appear on the display:
3) Now press the
Scroll Buttons
to change the day of the week; each number corresponds to one day of the week (e.g. 1
corresponds to Monday, 2 corresponds to Tuesday, etc...). To confirm the selected day of the week press the
Degrees Button
.
Once confirmed, the selector shifts to the hour section while the selected day of the week remains framed:
4) Press the
Scroll Buttons
to change the hour. Once you have set the hour confirm the value by pressing the
Degrees Button.
Once confirmed, the selector shifts to the minutes section. Press the
Scroll Buttons
to set the minutes. To confirm press the
Degrees Button
.
Once confirmed, the date and time setting screen closes automatically and the initial screen returns to the display.
If you confirm the wrong value simply press the
Menu Button
several times to exit the box until the initial screen will appear, and
repeat the procedure described above.
6.4 CHRONO: ON/OFF PROGRAMMING
The appliance must be energised and the I/0 switch in position “I".
The CHRONO function allows you to set the weekly program by setting up to 3 on-off cycles at different times for every day from
Monday through to Sunday.
To set a program follow the procedure described below:
1) Press the
Menu Button
twice
quickly to view the following screen:
After a few seconds the following screen will appear on the display:
Legenda
Key
RIARMO
RESET
SPIA MOTORIDUTTORE
GEARMOTOR
INDICATOR
3
4
2
1
5