Software description SRC-ADO
Thermokon Sensortechnik GmbH
Page 60
5.4 Learning-In of Sensors
After the properties of the output are set, the sensors must be assigned to the output. A
sensor is allocated to the output by setting a hook mark in the field “selection”. It is only
possible to assign suitable sensors to the output. Thus, it is not possible to allocate a key
to a temperature output.
Picture 5-5: Learning-in of Sensors
Select the device type (2) and actuate the button „learning-in of sensors“ (3). Now the
window “learning-in of sensors” appears and a sensor can be learned-in, accordingly (4).
1
2
3
4
