Software description SRC-ADO
Thermokon Sensortechnik GmbH
Page 19
If the SensorID of the sensor is known, the same can be entered manually. Otherwise a
sensor can be learned-in via the learning-in button. For learning-in of buttons, any rocker
must be actuated for the learning-in process. By means of a hook mark in the selection
field of the rider ”Sensor“ a sensor is assigned to the output. If
no
hook mark is set, the
same does not affect the output.
4.2.3 Clearing of Sensors
For clearing a sensor, the button
“Erase SensorID “ must be actuated. The clearing
window appears.
Picture 4-4: Clearing Window
If the inquiry is confirmed, the sensor is cleared. It is only possible to clear a sensor if it is
not assigned to another output.
4.2.4 Info
By means of the info button
the data bytes of the sensor are displayed.
Picture 4-5: Monitor
For the precise meaning of the individual data bytes, please see the product data sheet of
the sensor manufacturer.
